VentWorld    VentWorld    ventworld.infopop.cc  Hop To Forum Categories  RC Professionals    PB840
Go
New
Find
Notify
Tools
Reply
  
PB840
 Login/Join
 
Member
posted
We are using some 840 with reusable hose and reusable filter, we found that we cannot pass the leak test after we sterilize the filter. The leak seems to be in the insp. filter.

Anyone can suggest some solution?
 
Posts: 6 | Registered: December 05, 2002Reply With QuoteReport This Post
<Jon>
posted
Hello, I am a Puritan Bennett Representative.
If you are in the US, contact Puritan Bennett tech support at 800 255 6774. There was a short run of reusable inspiratory filters with faulty adhesive causing failure of SST due to leak of the filter. This has been rectified and Tech Support will arrange for return and replacement of those filters affected.
I hope this is of help.
Thank you.
 
Reply With QuoteReport This Post
Member
posted Hide Post
And dont forget to hook up with the Aerogen nebs. Finally a solutuion to the longstanding problem of the 840.
 
Posts: 3 | Registered: January 16, 2003Reply With QuoteReport This Post
Member
posted Hide Post
Buy a Draeger.

a mechanical ventilation genuis
 
Posts: 20 | Location: Tyler, TX | Registered: February 02, 2003Reply With QuoteReport This Post
Member
posted Hide Post
I am in Asia, they just give us disposible one, seems taht the problem is still there.
 
Posts: 6 | Registered: December 05, 2002Reply With QuoteReport This Post
  Powered by Social Strata  
 

VentWorld    VentWorld    ventworld.infopop.cc  Hop To Forum Categories  RC Professionals    PB840

© Copyright Equipment Simulations LLC, 2000-10. All rights reserved.