April 06, 2007, 12:19 AM
JohnRRTUsing LTV 1200 as BiPAP
This is for any LTV 1200 experts out there.
We recently received 2 new LTV 1200s and are working on a Work Instruction to use the vent as a BiPAP. We know how to set the BiPAP up, but we are wondering about some added features.
Here are our questions:
1. RISE TIME: How do you determine where to set this? What is a good Profile to start at? When would it be ideal to increase or decrease this?
2. FLOW TERM: When should this be used? If it is used, what is a good starting point? When should it be increased or decreased?
Any help here would be greatly appreciated.
April 06, 2007, 05:46 AM
JohnRRTSurfing the net, I answered my own question:
http://www.pulmonetic.com/support/support_clinical.aspx?712897232April 06, 2007, 06:52 AM
RentonI have not used the 1200 a lot (see previous topic). But I have been using the 900 and 1000 for a number of years.
1-If you are satisfied with the non-invasive feature of the LTV series, please tell me (it failed miserably every time I used it). Personnaly, I blame the turbine technology not working fast enough.
2-As far as Rise time and flow term are concern, I have personnal opinions, but there are some studies. Here's one: Critical Care Medecine; 2003; 31 (11); 2604-2610
3-Rise time: essentialy, I just ask the patient if I really need to. Usually, I start at Profile 4.
4-Flow term: It is not a mather of using it or not; it is how the vent cycles (goes from inspiration to expiration in any spontaneous mode). Most vents have a flow term (or E sens on a PB840 for exemple) of 25%, and it work. Again, patient confort can be improved (%up or down), of volume (% down, 10% is the lowest setting if I recall correctly).
Hope this helps.
April 06, 2007, 11:34 AM
JohnRRTThanks Renton. Your answer is very helpful.
We also have a Vision, but its nice to have a 2nd option in case we need it. It doesn't look like a 2nd Vision is in the budget, however much we are begging.
April 06, 2007, 11:41 AM
JohnRRTSurfing the net, I found this link to be helpful:
[EMAIL]http://www.pulmonetic.com/support/support_clinical.aspx [/EMAIL]
November 11, 2011, 07:38 PM
Mohammad Kquote:
Originally posted by JohnRRT:
This is for any LTV 1200 experts out there.
We recently received 2 new LTV 1200s and are working on a Work Instruction to use the vent as a BiPAP. We know how to set the BiPAP up, but we are wondering about some added features.
Here are our questions:
1. RISE TIME: How do you determine where to set this? What is a good Profile to start at? When would it be ideal to increase or decrease this?
2. FLOW TERM: When should this be used? If it is used, what is a good starting point? When should it be increased or decreased?
Any help here would be greatly appreciated.
November 11, 2011, 07:43 PM
Mohammad Kquote:
Originally posted by JohnRRT:
This is for any LTV 1200 experts out there.
We recently received 2 new LTV 1200s and are working on a Work Instruction to use the vent as a BiPAP. We know how to set the BiPAP up, but we are wondering about some added features.
Here are our questions:
1. RISE TIME: How do you determine where to set this? What is a good Profile to start at? When would it be ideal to increase or decrease this?
To set this value you from the top-left button
If I am not mistaken press the select button and hold for sveral seconds until you see set of menu in the "window".
Tha is how to access the utility.
2. FLOW TERM: When should this be used? If it is used, what is a good starting point? When should it be increased or decreased?
Any help here would be greatly appreciated.