|
|
||||||||||||
|
Go | New | Find | Notify | Tools | Reply |
<smd44> |
When we trialed the avea we had the same problem as btrdaddy. Our patients had a difficult time as a result of the limited flow capabilities. Also, my hospital is located in an area with a very high asthma rate and we had difficulties giving neb treatments as a result. | ||
Member |
smd44, btrdaddy, What mode were you in on the avea? What settings did you have the patient on? The Avea is very complex giving you many styles of ventilation with in the same "mode". We have one of these vents in our lab and when you set it up in PC or PRVC (there version)I am able to take in as much flow as I wish. Light | |||
|
<rt44> |
? | ||
<rt44> |
AVEA HAVE 200 LPM and VELA 180 LPM IS INSUFICCIENT?? | ||
<smd44> |
I was referring to the use of the nebulizer with children. You need atleast 15lpm of flow to run the neb and the neb draws 6 lpm from the flow. If we had a patient who didnt generate the 15 lpm we needed to use alternative methods. So often times my patients didnt receive the flow they needed. as a result we went with a different ventilator and are happy with the choice we made. | ||
<rt44> |
Now for Neonatal Patients MAQUET Critical Care is pleased to announce a range of new functionalities for the SERVO-i ventilator. These include many features for ventilation of neonatal patients, such as: Nasal CPAP Y Sensor Measuring The launch takes place at ESPNIC in Antwerp, September 15th-18th. A preview showing of the system has taken place at ISICEM in Brussels, March 21st-25th. Be sure to check back to the website for the latest information. | ||
<brandx> |
Again....it is good to finally see Maquet and the Servo-i FINALLY catch up to what the competition has been doing for years.......golf clap everyone. Marcus | ||
<btrdaddy> |
golf clap? too funny brandx. So now the Servo i does non invasive, invasive, nasay cpap, y-measurements for picky icn doc's who have been misled by numerous reps indicating that "triggering" actually takes place at the "y". Wow. Brandx.... question for you.... what vent company first came out with Pressure Support?.....think.... How about Pressure Control Ventilation?.... SIMV with pressure support?????...... Dual-Mode ventilation such a PRVC (poorly copied by all other companies)...... Automode (ooops no-one has copied that one yet)... built in CO2 monitoring? I understand that everyone has their own opinions... lets just not make brainless comments | ||
<RT 44> |
SERVO I FINNALLY PROXIMAL FLOW NEO, OOOOHHHH!! CONGRATULATIONS! | ||